6 Reasons why your vape device is leaking and How to Fix and Prevent It

How to Fix a Leaking Vape Device

Remove the pod or tank from the device

The first step in addressing a leaking vape device is to carefully remove the pod or tank from the device. This prevents any further leakage from seeping into the internal components, which could potentially cause damage or interfere with performance. Take off the pod from the device, and then shake the device for around 3-5 times to toss off the condensation.

Wrap your tank or pod in towelling paper and blow into the mouthpiece

Once removed, wrap your tank or pod in towelling paper. Then gently blow through the mouthpiece. This helps expel any excess e-liquid that may have pooled in the coil chamber or airflow system. Wrap your tank or pod in towelling paper and blow into the mouthpiece to force out any excess liquid in the coil chamber

Wipe up excess liquid in the chamber

Using a dry tissue or Q-tip, clean out any residual e-liquid inside the chamber of your vape device. Then put a Q-tip or tissue inside the device and wipe the residual condensate. This ensures a clean connection between components and prevents further leakage.

Let the device cool down

If your vape has been used heavily, allow it to cool before reassembling. Overheating can thin out e-liquids, making them more likely to leak through seals and coils. Make sure that you are using your coil within its recommended power range. Allowing time for cooling ensures optimal viscosity of your e-liquid.

Check if the coil is fitted correctly or needs replacing

Improperly installed coils are one of the most common causes of leaks. Most modern coils are plug-and-play, but they must be aligned properly. Most coils nowadays are plug-and-play so it’s worth checking that the coil is aligned and pushed in snugly. If your coil is burnt out, replace it immediately as degraded cotton cannot hold liquid effectively.

Make sure that you don’t overfill

Overfilling can result in liquid spilling into airflow channels. Always fill below the max line and avoid pouring e-liquid into central airflow tubes. Every vape pod or tank has a max fill level which, if exceeded, may cause the e-liquid to leak out.

Reasons Why My Vape Device is Leaking

You may not be filling your tank properly

Incorrect filling techniques often lead to leaks. Pouring e-liquid directly into airflow channels or overfilling can overwhelm seals and cotton wicks. Another common mistake is squeezing your e-liquid into the central airflow channel. Tilt your tank at a 45-degree angle while filling and stop before reaching maximum capacity.

The coil may not be properly installed

A loose or misaligned coil disrupts sealing mechanisms within pods and tanks. The coil itself has a silicone ring around it that forms part of the anti-leak design of the tank or pod so always make sure that it has been properly installed. For screw-in coils, ensure they’re threaded correctly to avoid gaps.

The pod or tank may be damaged

Cracks in glass tanks or damage to silicone seals can compromise structural integrity, causing leaks even when everything else seems fine. Glass tanks are prone to cracking from dropping or overtightening, it’s also worth unscrewing all the components and making sure that there is no damage to the silicone seals.

You are using the wrong e-liquid for your coil

Different coils require different viscosity levels based on their resistance and power output. Sub-ohm coils (below 1 ohm) demand high VG liquids due to their larger wicking ports and higher wattage requirements. Conversely, MTL devices with higher resistance work best with thinner high PG liquids such as 50:50 freebase nicotine blends. Using a thin high PG e-liquid in a direct-to-lung vape kit will result in a leak either because the looser cotton couldn’t hold the liquid or because it got too hot

Use high VG e-liquid with a sub-ohm kit and high PG freebase and nic salts with an MTL kit.

The coil may need to be changed

Coils degrade over time due to heat exposure and buildup from sweeteners in e-liquids. A worn-out coil loses its ability to retain fluid efficiently, resulting in leaks through airflow holes. If you notice a burnt taste or a discolouration of your e-liquid, changing your coil can provide a simple fix.

Coils last between 1 to 2 weeks, depending on use.

The device is getting too hot

Excessive heat causes thinner viscosity which leads to leaking issues especially if chain vaping without breaks. Vaping non-stop or “chain vaping” can cause your device to overheat your e-liquid resulting in a leak. Ensure you’re operating within recommended wattage ranges.

FAQ

Does vape pod leak?
VEIIK vape will not leak in general, but it can cause minor leaks during use due to changes in pressure, squeezing during breathing, Aggressive puffs, etc.

How do I clean my vape from condensation?
We suggest clean the condensate in a device regularly for about 2-3 days a time. Use tissues/Q-tips inside after shaking out moisture.

Why should I avoid keeping my vape upside down?
We recommend you to not keep your vape upside down when vaping or not in use. This prevents condensation build-up from entering mouthpieces.

What happens when there’s no vapor production?
Take off the pod from the device. Clean the bottom of pod with tissue. Then clean inside of device. Test with another cartridge if issue persists.

Get Best Vape Device from VEIIK and New Launched C FIBER Review

VEIIK continues its commitment towards innovation with its latest launch—the C FIBER disposable vape system designed for ultra-long endurance and powerful performance.

C FIBER offers up to 40,000 puffs supported by a robust 1000mAh rechargeable battery paired with dual mesh coils, ensuring consistent flavor delivery throughout its lifespan.

It features an intelligent LED screen (1.11 inches), adjustable TUR MODE (24W) / NOR MODE (12W), along with 30ml capacity filled with nicotine levels ranging from 0/20/30/50mg. The ultra-thin body provides comfortable handling while allowing users full control over airflow via an intuitive slider mechanism.

With VEIIK’s reputation as a high-tech enterprise specializing in design, research & development, production & sales of electronic cigarettes, users can expect both quality assurance and cutting-edge technology that aligns with evolving user needs across more than 40 countries globally.

For those seeking both performance and reliability without compromising on style—C FIBER stands as VEIIK’s flagship innovation redefining what modern vaping should feel like. Contact VEIIK for your vape products design,development and production today.